BT700 Bikepacking event report

Text by Adrian Grant
Photos by messkit magazine / Adrian Grant

Day Three.  The typically one of the hardest days of any long-distance bike trip.  It’s when the initial euphoria that can carry one through the first couple of days is replaced by general discomfort, occasional knee pain, and the realization that your pathetic attempts to hand wash your kit had done nothing to combat that particular odour emanating from your bike shorts.

Day Three on the Butter Tart 700 (BT 700) for me was no different.  It was also the day when the climbing began in earnest.  That’s not to say that the first two days were a walk in the park.  While according to the route’s elevation profile, a significant portion of the first 300k consisted of a gradual descent to Lake Huron, followed by a (mostly) flat ride to Owen Sound, the reality was that while there no significant climbs, the rolling terrain, open fields, slight headwind, heat/humidity, various rugged unmaintained sections, and long days in the saddle combined to make this initial portion of the route a real slog.  So much so that for many riders (including myself), the planned 150k ride to some wild camping spots south of Georgian Bay on the second day was aborted, in favour of a well-earned beer (or three) and the relative comforts of an $80 motel bed in the town of Thornbury.

Meanwhile, the planned route for Day Three included the start of the Blue Mountains portion of the trip.  While the term “Mountains” is most certainly a stretch, the amount of climbing – approximately 2,000 meters over the course of a single 140k day – was enough to give me pause.  I’m not afraid to admit that serious consideration was given to sleeping in and taking the most direct way to the next campsite, which was less than 15k away along a rail trail, thereby avoiding that day’s climbing altogether.

Alas, the route prevailed, as it always does.  And so began a series of punishing ups and downs, followed by the inevitable cursing directed towards my lack of climbing gears, my failing legs, various deities, the route organizers (with sincerest apologies Matt Kadey and Tabi Ferguson, the wonderful organizers of the BT 700), and especially the hordes of deer flies, who extracted their pound of flesh during each arduous climb.  Meanwhile, the amazingly fun and fast descents afforded by these hard-earned climbs were tempered by the knowledge that I would soon have to earn back every meter of lost altitude.

The day ended with a brake cooking descent off-route down the Niagara Escarpment to Craigleith Provincial Park. Expecting quiet site nestled beside the shores of Georgian Bay, I was instead greeted by a park nestled beside a busy provincial highway.  Using my cell phone’s white noise app in a vain attempt to replicate the outdoor sounds I was missing, I spent a restless night comforted by the roar of heavy truck traffic.

The next morning included more of the same – except with the added bonus of an additional 260 meter climb back up the Escarpment over the course of three kilometers, just to get back to the main route.  I was also treated to a humid fog that blanketed the route for much of the morning, adding a sauna-like quality for the first half of the day’s ride, as well as several more sections of rocky unmaintained roads and singletrack (much of the latter I admittedly bypassed in favour of the approved gravel road alternatives).

Day Four was also the day I became reacquainted with the old adage “a bird in the hand”.  After satisfying my mid-afternoon hunger with a grilled cheese from the Hockley General Store, I was tempted to pick up another couple of sandwiches to go (along with a beer or two, natch), before riding the remaining 20k to the village of Palgrave and my eventual campsite for the evening.  However, I decided to forgo the additional sandwiches and beer in favour of dinner in Palgrave.  Much to my chagrin, it turned out that the only restaurant in town – a charming church-pub conversion – had been permanently shuttered for some time, leaving only a small variety store to forage for my evening repast.  Turns out that a man can survive on Pringles and Slim Jims alone…

Lesson learned, the next morning I eagerly set off the final day of the BT 700, during which I learned another valuable lesson – I’m not good at taking lessons to heart.  So yes, after cycling 20k in the morning heat, I decided to forgo stopping at one of several nearby convenience stores located in the bustling town of Caledon, and instead pushed on to the small village Inglewood, a further 10k away.  After all, Google Maps had assured me that there was a single general store in which to replenish my dwindling water supply.  No prizes if you guessed that this store also had all the appearances of having been closed for some time.  Thankfully, much of the remaining route was on mellow rail trail all the way back to St. Jacobs, where a cold beer at the Block Three Brewing Company and a hearty congratulations from Matt awaited.

This was my first bikepacking trip using the Panorama Katahdin and overall the bike acquitted itself admirably throughout.  The bike handled the rough and rowdy unmaintained sections with aplomb, with much of the credit going to the bike’s ability to clear the 700×45 WTB Riddler tires.  It also helped that the stock rims allowed me to run these tires tubeless, as I saw several riders with pinched flats over the first couple of days.  I also found the bike very fun to ride, even strapped down with all my gear, and extremely comfortable during my long days in the saddle.  In hindsight, the only thing I would have changed prior to the trip is the chainset or rear cassette, as some wider gearing certainly have been appreciated on the third and fourth days of the trip.

And a special thanks to Matt Kadey and Tabi Ferguson, the creators for the BT 700 for developing such a fantastic and challenging route!

SHOP OUR PRODUCTS

  • patte de derailleur torngat
    derailleur hanger panorama cycles

    Derailleur hanger

    Always a good idea to have a spare derailleur hanger when venturing a little further than usual...
    25$40$ (CAD)
  • thru axle - panorama cycles
    thru axle - panorama cycles

    Thru axle – Front wheel

    Thru axle for the front wheel.  Bolt-on type (no lever), install with 6mm hex key.
    40$ (CAD)
  • framebag
    framebag

    Custom Framebag

    Custom-made frame bag by Atwater Atelier, to match your Panorama Cycles bike. Many color, material and feature options available. Refer to the Atwater Atelier website for details or contact us directly. How to order: 1- Make the purchase on our website. Add as a note to the order the model, year, color and size of your Panorama Cycles bike. 2- Upon receipt of your order, a member of our team will contact you to select options, if applicable. 3- Bag manufacturing time varies from 6-10 weeks. Basic features ($290):
    • Access to a large compartment on the drive side
    • Brightly colored 70D Ripstop inner lining for better visibility
    • 2" wide by default
    • Cordura™ 1000D nylon outer
    • Sunguard™ UVR poly thread
    • Velcro™ fastening system
    • YKK™ #8 AquaGuard or #10 Vislon zipper
    290$ (CAD)
  • thru axle - panorama cycles
    thru axle - panorama cycles

    Thru axle – Rear

    Thru axle for the rear wheel.  Bolt-on type (no lever), install with 6mm hex key.
    40$ (CAD)
  • panorama 29in fatbike wheelset
    panorama cycles fatbike wheelset

    29in fatbike wheelset

    Spring is coming? It's time to transform your fatbike with these 29" wheels and make it your exploration or trail bike.
    • 29" Sun Ringle DÜROC 40 rims. Compatible with 2.4'' to 2.8'' tires.
    • Front hub: Sun Ringle SRC 15mmx150mm
    • Rear hub: Sun Ringle SRC 12mm x 177 or 197mm, HG, XD or Microspline cassette body available
    • Spokes: Stainless steel double butted
    • Quality handbuilt by Panorama Cycles
    949$ (CAD)
  • panorama touch up paint
    panorama touch up paint

    Touch up Paint

    Because sometimes small scratches do happen... We want you to keep your bike for long and in good condition!
    • 5ml bottle
    • High-quality all-in-one paint, no need to apply a clear coat
    * Unfortunately, we can only ship paint within Canada. * If the color you want is not in the options below, please contact us.
    14.99$ (CAD)
  • Sale
    Panorama Forillon
    panorama forillon

    Forillon

    * New bike. Only size small left. Please refer to the component list for specifications. The Forillon is your best ally for cycling around the world. It is designed to be ridden efficiently on a variety of road types, while remaining stable and easy to handle when loaded with all your luggages. It's easy to see why the family behind the Terra Tributa project made these their bikes of choice for their nomadic lifestyle. Strength and reliability are highlighted in the choice of components. The 36 spokes double walled with reinforced eyelets rims paired with 700x44mm tires and the Microshift transmission offering an immense speed range of 585% are perfect examples. The Reynolds 525 steel tubeset as well as the 4130 steel fork have been selected to maintain excellent stiffness once the bags and panniers are added. Features such as the addition of extra spokes mounts, integrated kickstand plate, multiple mounts for bottles, front and rear racks and fenders make this a true Swiss Army knife for on-the-go travel bike.
    2,039$ (CAD)
  • taiga 2024
    taiga 2024

    Taïga

    Free shipping on the Taïga. Promotion runs until May 10. Canada and USA residents only. ''The Taïga is a worthy adventure bike through and through. It is perfectly set up for some trail shredding straight out of the box.'' Read the complete review HERE. In between a trail bike and a multi-day adventure bike, the Taïga has multi purposes. Take it on your local mountain bike trails, or for a bikepacking outing in the more rugged backcountry trails. Our selection of Reynolds 725 tubing gives this frame just the right amount of suppleness and responsiveness, while keeping the weight reasonable. A 67deg steering angle and 75deg seat angle strike a balance between modern and progressive geometry, without falling into an overly radical design. The 435mm chainstay length offers a centered position on the bike (front-center versus rear-center ratio), and can be increased for even greater stability when a rear rack is used. * Complete bike (starts at $2949 CAD) * The frameset (carbon fork) comes with wheel axles, headset installed, seatpost collar and frame protectors. (1649$ CAD) * The frame only option comes with the rear wheel axle and seatpost collar. (1199$ CAD) * The Rohloff option comes with the Speedhub 500/14 A12 DB PM black, the 180mm rear disc, the shifter and everything needed to install the hub on the frame. (+1899$ CAD)
    1,199$3,548$ (CAD)