Calabogie Madawaska River Bikepacking Circuit

3-day trip in the Ottawa valley

Photos et Texte par Mike McGuire

Version française à venir…

To start off the 2017 bike season, our extended bikepack group decided to do a loop in Lanark county that runs from Calabogie, ON, up around the Norcan Lake and back to Calabogie though Lanark County.

Over the winter, the Ottawa Valley Bikepacking Collective Facebook group really started to take off and we met a bunch of new like-minded riders with slightly different focus including gravel riding and bike touring.  The proposed route was a combination of ideas that had been previously tried and some new thoughts.  Our goal for the weekend was to get some early season riding in to strengthen our legs, test out our equipment, and check out the proposed route, seeking out some new camping spots and refining what we knew about the trails and roads.

Our group was made up of 8 different riders, all experienced in bikepacking with a few rides under everyone’s belts.  One group of 3 only had 2 days to ride, so they planned do one overnight and about 1/3 of the main route and then head back to the start point.  The second group would camp 2 nights and complete the 100km (or so) of the full loop.  Everyone was very stoked for this season opener.  I figured it would be relatively straight forward, having spent some time up on those ATV roads in the past.  It seemed like a good trip to see if our personalities fit well and we could all have fun together.

The route is made up of a combination of ATV trails, Hydro cut roads, dirt roads and the odd highway section.  The terrain is varied and has some big hills and flats along the river.  It was early in the season so we didn’t know what the ground would be like.  Much of the route was dry, but we did hit a bunch of mud sections and many of the steep hilly Hydro cut climbs had been washed clean of dirt down to exposed rock and rubble.  I had already decided to run 3” wide tires on 27.5+ wheels on my Fatbike and the wider tires definitely made for easier going in spots and didn’t really slow us down on the long fire roads of day 3.  Within the group, 3” tires turned out to be the widest anyone was running.  The other riders used to biking longer distances all ran 29” wheels with 2.1” tires on trekking bikes like the Kona Unit.  Everyone made it through the route pretty well, but the fatbikes made for easier going in places, especially on the sustained downhills.

We ended up with 3 groups all departing at slightly different times.  The plan was for everyone to converge on the first “secret” campsite on the same Friday evening, about 20km from the start spots.  The first group left before us around lunch time.  My trusted adventure buddy Kelly and I made up the second group to head out Friday after lunch.

Kelly and I decided to park in town, sample some beers at the local Calabogie Brewery, and have lunch at the Redneck Bistro before hitting the trail.  The burger at the Redneck Bistro was spectacular.  One of the best burgers I’ve had anywhere.  With a few beers down the hatch, we parked at the public park on the dam in the center of town and kitted up our bikes.  I ran all my soft bags and 2 fork cages so I had plenty of room for my cold temperature sleeping bag, insulated hammock pad and puffy coat with the rest of my gear.  Because I ride an XL frame, my frame bag is pretty big and I don’t need to carry much on my back and I just used my Hauser 10L Hydration pack with the bladder removed.

The weather was sunny and warm and we headed out across town towards the ski hill and down the newly paved road into the Barret Chute Estate development.  This road used to be dirt and rugged but has been developed for new housing.  Tucked at the end of the road, is the access gate to the Hydro easement road.  There’s a sign that says “Private Property” or “No motorized vehicles” or something, but the gate is not locked and it’s illegal to block access to crown land so I wasn’t worried.  But we hurried through quickly just to get out of sight and not draw any attention.

At this point we came to a fork in the trail and the GPX track that we’d been provided went up the hydro road.  I saw the tracks from the earlier group, but Kelly insisted we take the lower route by the river.  Which turned out to be amazing!  The lower path is an old ATV trail that has not seen traffic in a while.  It had many small trees downed and a few small mud sections with no tire tracks.  We followed it along the scenic river until it climbed out of the river valley into an old farm field and rejoined the ATV track.  Into the forest the ATV track was packed with a few mud sections and then we hit some big climbs.  I was glad to be running a 28t front ring and managed to get up everything even with 55lbs of bike, gear and food.

At the top of the highest climb we met up with the first group, had a quick beer and then bombed down the other side of the mountain into the ravine.  The year before on a scouting trip some of the group had found a river campsite by accident that was not visible from the double track.  There’s an old ATV track and deer stand just off the road but it’s overgrown and hard to see.  As we dropped down we could see nobody was canoe camping there.

It’s a great campsite.  Lots of perfect trees for hammocks, a picnic table, an outhouse, and even a tiny canoe dock!  We quickly set up and then plopped down beside the river to enjoy the later afternoon.  It was fun getting to know our new friends.  We talked about gear and food and just as the sun was setting the other 3 riders from the late start group showed up.  We settled in with a cozy fire and some spirits and continued the fun conversations while we all cooked dinner.  Over a 3 day trip, I usually bring fresh meat to barbeque and packs of potatoes for the fire.  Everyone had their own food routines; Ted and Vanja brought burritos which they heated in tinfoil.  Joe, Adrian, Loïc and Grant ate rehydrated meals.  Kelly had leftover pizza.  Clearly my Jerk Chicken breasts and spicy potatoes were the winner that evening.

We partied a little late that night, retiring into our respective hanging shelters well after midnight.

On day 2, the weather was warmer.  The sun was shining and people woke up slowly.  There may have been a few hangovers in play.  This day was a mixed day of travel including double track, gravel road, a little highway, and some rugged double track with rough climbs.  Group 1 was planning on heading back to the start point today.  They would split from the pack after a few hours.  The rest of us would head towards where we thought there would be a few campsites.

We packed up and hiked up the steep embankment back to the ATV track.  It was pretty clear that there was an old ATV track in the morning sun.  But fortunately, the deadfall surrounding the road and the extra 1km down the hill probably keeps most people off this particular site.  Back on the road, we started the day with a few steep climbs and deep mud holes before we emerged onto a well-used gravel road with several boat launches on it.  Over the next hour we cranked along past another boat launch and campsite at Waburn Lake and saw lots of offshoot trails.  It seems like there must be a lot of intertwined roads in this are that probably lead to great camping.

At the highway, group 1 headed North back towards their vehicle and the rest of us headed south to Mountain Chute Dam.  After a quick spin on pavement we crossed the bridge below the dam where the water was raging through the spillway.  We took a break to enjoy the spectacle; It was an impressive site I’ve never seen here before due to all the rain in the spring.  We could have continued on the paved road up the next climb, but instead decided to take the much rougher and looser ATV track directly up the hill.  Again, I was impressed how well the bike and 3” tires connected on the loose trail and I was able to make it all the way in one clean climb.  Regrouping at the top a the main trail intersection, we checked the map to make sure we were heading down the right trail.  A local guy in a pickup truck, Kevin, stopped to check out the bikes and chat.  He said that he’d never seen anybody biking out here before and was quite interested in our equipment and soft bag set ups.  He also told us about a ranger cabin on our route that had recently been opened for overnight stays.  He told us where to turn off if we wanted to check it out and we decided to scope it out on our way for future use.

The next section of route progressed from gravel road to dirt road to rougher double track and we moved deeper into Crown Land.  The grade was mostly easy going, but after a few hours, hangovers stated to slow some of us down.  We saw a few ATV’s and we were actually passed by a pair of Provincial Police ATV.  Apparently, they patrol the trails here for speeding and drunk drivers.  It was good to know that in an emergency we might be able to get help.  When we found the turnoff to the secret cabin that Kevin mentioned, we decide to break for lunch and rest for the last push to camp.  Loïc and I decided to look for the cabin down the track but discovered a fast flowing and cold stream raging across the road about 100 yards in.   A beaver dam had broken open and the deep water was moving fast.  Loïc decided to take off his shoes and socks and fjord the stream; I opted to keep my feet warm and dry and joined the others for lunch.  We used our water filter to refill hydration packs and water bottles from the cold stream and everyone chowed down.  Loïc returned a while later, reporting that he walked down the trail about 1km but did not find the cabin.  We’ll have to search again next time.

After lunch we pushed towards Lake Muir to find a campsite.  And found a few.  It turns out that this more southern area is maintained by the North Frontenac Park Lands Association. You are supposed to reserve and pay for these maintained campsites online, but we decided we would squat on the nicest one we found at Hungry lake since we didn’t know about them in advance.  When we found the site, there was a guy there with a truck, but he didn’t look like he was camping.  He said that he wasn’t staying the night and we should grab the site.  His name was Kevin too.   He also thought we were a little crazy using bikes to access the area.  He was chatty and friendly and when I took out my pocket saw to start hacking wood for a fire, he laughed and grabbed a chainsaw from his pickup.  He then proceeded to cut up a huge log for us so we would have lots of wood for the night.  Kelly was sly enough to ask him if he would mind sharing a little Pepsi with us, since we had Rum but no mix.  Thanks again Kevin.

That night was a little more chill than the first night.  Grant had a long hangover nap before dinner and Loïc spent most of the evening setting up and taking down his hammock and tarp, trying different configurations.  After a few hours, it looked like he had a good set up.  But in the morning he reported that he woke up on the ground a few time during the night due to rope stretch.

Day 3 was our home stretch on logging roads with big, long climbs.  We broke camp mid-morning and hit road in sunshine and cool temperatures, headed back to Calabogie.  The roads were pretty well graded, other than one or two spots where streams had broken through and wiped out the entire road.  We slogged up and down roads for a few hours, gaining elevation until we reached the highest point on this stretch.  Descending back down to Barret Chute Dam, we connected to the old K&P Rail Trail and headed for town, turning right at the golf course and then left on the highway back into town as a pack.

Naturally, we regrouped at the Redneck Bistro for more Calabogie Brewery Beers and food.  Everyone was a little tired, but excited about the route we’d just completed.  A great adventure with some new friends.

  • Distance: 77km
  • Total climb: 1280m
  • No. of nights: 2
  • Terrain type: combination of ATV trails, Hydro cut roads, dirt roads and the odd highway section.
  • Bike: Panorama Chic-Chocs fatbike – 27.5×3” wheelset
  • Food and snacks
  • Cycling clothes
  • Camp/night clothes
  • Jetboil + camp kitchen kit
  • Water filter
  • Hammock
  • Sleeping pad + sleeping bag
  • Bike multi-tools + spare tube
  • Headlamp + Leatherman
  • 1st aid kit / Phone

  • Distance Instructions
Label

Altitude VS Distance

VOIR NOS PRODUITS

  • taiga 2024
    taiga 2024

    Taïga

    *2024-01-10: Mise-à-jour avec les options de composantes 2024.

    "Le Taïga est un vélo d'aventure digne de ce nom. Tout juste sorti de sa boîte, il est aussi parfaitement configuré pour dévaler les sentiers." Lire l'article complet ICI (en anglais).

    À mi chemin entre un trail bike et un vélo d'aventure hors route, le Taïga est à vocation multi-usage. Emmenez-le dans vos sentiers de vélo de montagne locaux, ou pour une sortie bikepacking dans les chemins accidentés de l'arrière-pays.

    Notre sélection de tubes Reynolds 725 procure à ce cadre la bonne dose de souplesse et de réactivité, tout en gardant le poids raisonnable. Un angle de directions de 67deg et de selle de 75deg atteint l'équilibre entre une géométrie moderne et progressive, sans toutefois tomber dans un design trop radical. La longueur des bases arrière de 435mm offre une position centrée sur le vélo (ratio front-center versus rear-center), et peut être augmentée pour encore plus de stabilité lorsqu'un porte-bagage est utilisé.

    * Vélo complet (débutant à 2949$ CAD) * L’ensemble cadre et fourche carbone est livrée avec les axes de roue, le jeu de direction installé, le collet de tige de selle et les protections de cadre. (1649$ CAD) * L'option cadre seulement est livrée avec l'axe de roue arrière et le collet de tige de selle. (1199$ CAD) * L’option Rohloff est livrée avec le moyeu Speedhub 500/14 A12 DB PM noir, le disque arrière 180mm, la manette de vitesse et tout le nécessaire pour installer le moyeu sur le cadre. (+1899$ CAD)
    1,199$3,548$ (CAD)
  • thru axle - panorama cycles
    thru axle - panorama cycles

    Axe traversant – Roue avant

    Axe traversant pour roue avant.  Type bolt-on (pas de levier), s'installe avec une clée hexagonale de 6mm.
    40$ (CAD)
  • Panorama boreal
    Panorama boreal

    Boreal

    ***En stock, nous expédions tous les jours!! Le Boreal est un vélo de touring tout terrain pensé pour transporter son utilisateur.trice dans une position relevée et confortable lors de voyages et expéditions. Le cadre et la fourche sont robustes, et les composantes sont fiables et requièrent peu d'entretien. Capable de prendre du chargement, le Boreal est totalement désigné parfait pour vous accompagner pour vos projets les plus ambitieux. Ce vélo possède la même géométrie et les mêmes caractéristiques que le Boreal-Pinion. Contrairement à ce dernier, qui est équipé de la transmission interne, le Boreal est assemblé avec une transmission Shimano SLX en 1x12, ou alors avec une transmission Shimano Cues 6000/8000 en 2x11. Cette dernière option offre une immense plage de ratio vitesses, soit 669% versus 510% pour le 1x12. L'option d'un montage avec un moyeu Rohloff Speehub 14 vitesses est aussi disponible. Pour une utilisation en touring multi-surface (mi-route/mi-hors route), des pneus 29x2.0 (700x50) permettront un roulement optimal. Pour une utilisation hors route, les pneus 27.5'' de diamètre équivalent, soit les 27.5x2.6 seront le choix approprié. Les 2 options de roues 32 rayons (pour une grande durabilité) sont d'ailleurs offertes lors de l'achat du vélo complet. Dans tous les cas, le dégagement pour la boue ne manquera pas, alors que le cadre et la fourche peuvent accommoder des pneus de 29x2.8. *** Se référer à la liste de spécifications pour les détails des composantes. * L’option Rohloff est livrée avec le moyeu Speedhub 500/14 A12 DB PM noir, le disque arrière 180mm, la manette de vitesse. L'option chaîne vient avec un plateau/pignon 34/16T et l'option courroie en 42/19.
    1,399$2,899$ (CAD)
  • framebag
    framebag

    Sac de cadre sur mesure

    Sac de cadre fabriqué sur mesure par Atelier Atwater, s'agençant parfaitement à votre vélo Panorama Cycles. De nombreuses options de couleurs, matériaux et caractéristiques disponibles. Référez-vous au site d'Atwater Atelier pour les détails ou contactez-nous directement. Procédure de commande: 1- Faire l'achat sur notre site web. Ajouter comme note à la commande le modèle, l'année, la couleur et la grandeur de votre vélo Panorama Cycles. 2- À la réception de la commande, un membre de notre équipe vous contactera afin de sélectionner avec vous les options s'il y a lieu. 3- Le delai de fabrication du sac varie de 6-10 semaines. Caractéristiques de base (290$):
    • Accès à un grand compartiment du côté de la transmission
    • Doublure interne en 70D Ripstop de couleur vive pour une meilleure visibilité
    • 2" de large par défaut
    • Cordura™ 1000D nylon externe
    • Fil poly Sunguard™ UVR
    • Système de fixation Velcro™
    • Fermeture à glissière YKK™ #8 AquaGuard ou #10 Vislon
    290$ (CAD)
  • panorama anticosti 2023
    panorama anticosti 2023

    Anticosti

    Lorsqu’on s'aventure sur les chemins moins fréquentés de l’arrière-pays, il arrive qu’une belle route devienne beaucoup plus cahoteuse que ce que nous avions prédit. L’asphalte devient alors du gravier, et le gravier devient littéralement un sentier hors route. C’est pour ce genre d’aventure que l’Anticosti a été créé.

    Le vélo Anticosti est construit avec une sélection sur mesure de tubes d’acier Reynolds 725, amincis là où il le faut afin d'en réduire la masse. Pour cette génération, la géométrie est révisée (longueur tube de selle plus court et angle de direction un peu relâché) et de nouveaux chainstays courbés offrant plus de dégagement au pneu arrière. Ce vélo prêt pour une rapide boucle de gravel, ou pour un projet plus ambitieux de voyage sur plusieurs jours.

    *L’ensemble cadre et fourche est livré avec les axes de roue, le jeu de direction installé, le collet de tige de selle et les protections de cadre.
    1,649$3,299$ (CAD)
  • Épuisé
    panorama cycles t shirt
    panorama cycles t shirt

    T-Shirt S24O

    "S24O" (aka Sub 24h Overnighter) est, dans le jargon du bikepacker, une aventure de moins de 24 heure incluant une nuitée. La définition de micro-aventure!
    30$ (CAD)
  • panorama 29in fatbike wheelset
    panorama 29in fatbike wheelset

    Ensemble de roues 29po pour fatbike

    Le printemps arrive? C'est le temps de transformer votre fatbike avec ces roues 29po et d'en faire votre vélo d'exploration ou de trail.
    • Jantes 29po Sun Ringle DÜROC 40. Compatibles avec pneus 2.4'' à 2.8''.
    • Moyeu avant: Sun Ringle SRC 15mmx150mm
    • Moyeu arrière: Sun Ringle SRC 12mmx197mm, corps de cassette disponible HG, XD ou Microspline
    • Rayons: Stainless steel double butted
    • Montage à la main de qualité par Panorama Cycles
    949$ (CAD)
  • Panorama Boréal Pinion
    Panorama Boréal Pinion

    Boreal – Pinion

    ***C'est le temps de précommander votre Boréal Pinion. Utilisez le code promo borealpinion lors de votre achat pour procéder au dépôt de réservation de 50%. Livraison prévue pour avril 2024. Après des tests concluants sur les 2500+km de la Baja Divide au Mexique et lors de l'expédition TransBoréale (traversée hivernale intégrale du Québec du sud au nord), le vélo Boréal Pinion est offert pour une série limitée. Chaque vélo sera peint sur commande afin d'en faire une pièce complètement unique. Le Boréal Pinion est pensé pour transporter son utilisateur avec confiance lors de voyages et expéditions autour du monde. Le cadre et la fourche sont  robustes, et les composantes sont extrêmement fiables et requièrent peu d'entretien. Au coeur du Boréal Pinion se trouve la transmission interne Pinion. Celle-ci, combinée à la courroie carbone Gates, ne nécessite pratiquement aucun entretien et est excessivement résistantes. La performance du système de vitesse interne Pinion est inégalée, alors que la plage de ratio de vitesses est excessivement grande (600% pour le modèle C1.12 - autres modèles disponibles sur demande) et que chacune des vitesses est espacée de manière égale. Pour une utilisation en touring mi-route/mi-hors route, des pneus 29x2.0 (700x50) permettront un roulement optimal. Pour une utilisation hors route, les pneus 27.5'' de diamètre équivalent, soit les 27.5x2.6 seront le choix approprié. Les 2 options de roues 32 rayons (pour une grande durabilité) sont d'ailleurs offertes lors de l'achat du vélo complet. Dans tous les cas, le dégagement pour la boue ne manquera pas, alors que le cadre et la fourche peuvent accommoder des pneus de 29x2.8. *L'ensemble cadre/fourche+Pinion est livré avec la transmission Pinion C1.12, les bras de pédalier en aluminium forged ainsi que la manette de vitesse. Les axes de roue, le jeu de direction installé, le collet de tige de selle et les protecteurs de cadre sont aussi inclus.
    4,399$5,999$ (CAD)