Introduction to gravel

Text by Adrian Grant
Photos by Eric Levert / Crossroad Tremblant

Before entering the mainstream, gravel riding was very much an opportunity to “run what you brung”, whether it was an older hardtail or a road bike with 28mm tires shoehorned between the chainstays.  Neither of these options were ideal.  On long loops, any significant stretches of asphalt could turn into a slow and disheartening experience on a mountain bike.  Meanwhile, road bikes, with their skinnier tire, could be downright treacherous when the pavement ended and dirt began.  The advent of cyclocross bikes provided a better option, but with their aggressive geometry, short wheelbases, and only marginal improvements in terms of tire clearance relative to road bikes, they still weren’t a gravel cyclist’s panacea.  What was needed was a non-competitive yet high performance bike, designed for both adventure and fun.

In response, the last five years have seen an explosion in the development of gravel-specific bikes.  These include drop-bar frames with a more comfortable upright geometry for longer days in the saddle, and most importantly clearance for high volume tires (a minimum of 700x35mm up to 54mm or more (!) when equipped with a 650b/27.5 wheelset).  This has allowed riders to push the envelope even further as to where one could conceivably ride a bike that, at its heart, was originally designed for pavement.

While gravel bikes are viewed by some as yet another special niche, created by a bike industry eager to exploit those looking for their next n+1, I see them as a practical and versatile solution to the problems the average cyclist faces every time they just want to go out for a ride.  Specifically, gravel bikes offer an antidote to riding with heavy traffic.  Because, let’s face it – cycling on roads with heavy traffic sucks.  It can be a stressful nightmare of honking horns, high-speeds, and distracted drivers.  And to be frank, the culture around road cycling can at times be intimidating, pretentious and unfriendly to the unshaven hoi polloi unfamiliar with “The Rules”.

In comparison, gravel roads provide opportunities to traverse remote and scenic landscapes, devoid of cars and other distractions, resulting in a relaxing experience.  Perhaps that’s why the culture around gravel riding is generally much more mellow.  Forget aggressive pace lines, wattage metrics and Strava times, and focus instead on having a good time!  Whereas roadies may shun the use of saddle bags or other accruements, gravel riding embraces the use of top tube bags, handlebar bags and framebags to stash essentials like sandwiches, gummy bears and a can of your favourite IPA.  Rest stops (or even better, pub stops!) are considered welcome opportunities to eat, drink, and socialize with your fellow riders, and not evidence that you need to harden up.

In short, gravel riding is road cycling’s chilled-out cooler cousin.  The cousin most likely to offer you a beer rather than an energy gel.  It’ll remind you what’s it’s like to be a kid again, when what mattered most was exploring new places, making friends, and having a good time.  So go play in the dirt.  Slow down, don’t speed up.  Ride like you have nothing to prove, not to prove a point.

Go find your nearest gravel road.  And just go for a ride.

SHOP OUR PRODUCTS

  • Sold out
    panorama cycles t shirt
    panorama cycles t shirt

    T-shirt Bikepacking

    A fully equipped fatbike ready to take off. Bikepacking pure and simple.
    30$ (CAD)
  • Sold out
    panorama cycles t shirt
    panorama cycles t shirt

    T-Shirt S24O

    "S24O" (aka Sub 24h Overnighter) is, in the jargon of the bikepacker, an adventure of less than 24 hours including an overnight stay. The definition of micro-adventure!
    30$ (CAD)
  • framebag
    framebag

    Custom Framebag

    Custom-made frame bag by Atwater Atelier, to match your Panorama Cycles bike. Many color, material and feature options available. Refer to the Atwater Atelier website for details or contact us directly. How to order: 1- Make the purchase on our website. Add as a note to the order the model, year, color and size of your Panorama Cycles bike. 2- Upon receipt of your order, a member of our team will contact you to select options, if applicable. 3- Bag manufacturing time varies from 6-10 weeks. Basic features ($290):
    • Access to a large compartment on the drive side
    • Brightly colored 70D Ripstop inner lining for better visibility
    • 2" wide by default
    • Cordura™ 1000D nylon outer
    • Sunguard™ UVR poly thread
    • Velcro™ fastening system
    • YKK™ #8 AquaGuard or #10 Vislon zipper
    290$ (CAD)
  • taiga 2024
    taiga 2024

    Taïga

    *2024-01-10: Updated with the 2024 specifications. In stock! ''The Taïga is a worthy adventure bike through and through. It is perfectly set up for some trail shredding straight out of the box.'' Read the complete review HERE. In between a trail bike and a multi-day adventure bike, the Taïga has multi purposes. Take it on your local mountain bike trails, or for a bikepacking outing in the more rugged backcountry trails. Our selection of Reynolds 725 tubing gives this frame just the right amount of suppleness and responsiveness, while keeping the weight reasonable. A 67deg steering angle and 75deg seat angle strike a balance between modern and progressive geometry, without falling into an overly radical design. The 435mm chainstay length offers a centered position on the bike (front-center versus rear-center ratio), and can be increased for even greater stability when a rear rack is used. * Complete bike (starts at $2949 CAD) * The frameset (carbon fork) comes with wheel axles, headset installed, seatpost collar and frame protectors. (1649$ CAD) * The frame only option comes with the rear wheel axle and seatpost collar. (1199$ CAD) * The Rohloff option comes with the Speedhub 500/14 A12 DB PM black, the 180mm rear disc, the shifter and everything needed to install the hub on the frame. (+1899$ CAD)
    1,199$3,548$ (CAD)
  • Sale
    panorama cycles touring wheelset
    panorama cycles touring wheelset

    Touring 36 spokes wheelset

    36 spoke wheelset reinforced with eyelets at each hole. Double wall rims provide the best strength for a heavily loaded bike.
    • 700c DB-30 rims, 25mm internal, 36 spokes, double wall, reinforced eyelets
    • Front hub: Novatec D791SB sealed bearings, 12mmx100mm
    • Rear hub: Novatec D792SB sealed bearings, 12mmx142mm, HG cassette body
    299$ (CAD)
  • panorama touch up paint
    panorama touch up paint

    Touch up Paint

    Because sometimes small scratches do happen... We want you to keep your bike for long and in good condition!
    • 5ml bottle
    • High-quality all-in-one paint, no need to apply a clear coat
    * Unfortunately, we can only ship paint within Canada. * If the color you want is not in the options below, please contact us.
    14.99$ (CAD)
  • panorama anticosti 2023
    panorama anticosti 2023

    Anticosti

    When you venture on the less traveled roads of the backcountry, sometimes, the beautiful road becomes much more bumpy than what was predicted. The asphalt becomes gravel, and the gravel literally becomes an off-road trail. It is for this kind of adventure that the Anticosti was created. The Anticosti bike is built with a custom selection of Reynolds 725 steel tubing, tapered where necessary to reduce weight. For this generation, the geometry has been revised (shorter seat tube length and slightly slackened steer angle) and the new shaped chainstays offer more clearance to the rear tire. This bike is ready for a quick gravel loop, or a more ambitious multi-day trip. *Frameset comes with wheel axles, headset installed, seatpost collar and frame protectors.
    1,649$3,299$ (CAD)
  • Panorama Boréal Pinion
    panorama boreal pinion

    Boreal Pinion

    ***It's time to pre-order your Boreal Pinion. Use the promo code borealpinion at checkout to proceed to the 50% reservation deposit. Delivery scheduled for April 2024. After conclusive tests on the 2500+km Baja Divide in Mexico and during the TransBoreale expedition (complete winter crossing of Quebec from south to north), the Boreal Pinion bike is offered in a limited series. Each bike will be painted to order, making it completely unique. The Boreal Pinion is designed to carry its rider with confidence on journeys and expeditions around the world. The frame and fork are robust, and the components are extremely reliable and low-maintenance. The highlight of the Boreal Pinion is the Pinion drivetrain. Combined with the Gates carbon belt, it is virtually maintenance-free and extremely durable. The performance of the Pinion internal gear system is unsurpassed, while the wide range of gear ratios is exceedingly large (600% for the C1.12 model - other models available on request) and each gear is evenly spaced. For half-road/half-off-road touring, 29x2.0 (700x50 equivalent) tires will provide an optimum ride. For off-road use, 27.5" tires of equivalent diameter, i.e. 27.5x2.6, are the appropriate choice. The two 32-spoke wheel options (for greater durability) are offered with the purchase of the complete bike. In both options, no lack of mud clearance while the frame and fork can accommodate 29x2.8 tires. *The frame/fork+Pinion set comes complete with Pinion C1.12 drivetrain, forged aluminum crank arms and shifter. Wheel axles, installed headset, seatpost collar and frame protectors are also included.
    4,399$5,999$ (CAD)