fbpx

BT700 Bikepacking event report

Text by Adrian Grant
Photos by messkit magazine / Adrian Grant

Day Three.  The typically one of the hardest days of any long-distance bike trip.  It’s when the initial euphoria that can carry one through the first couple of days is replaced by general discomfort, occasional knee pain, and the realization that your pathetic attempts to hand wash your kit had done nothing to combat that particular odour emanating from your bike shorts.

Day Three on the Butter Tart 700 (BT 700) for me was no different.  It was also the day when the climbing began in earnest.  That’s not to say that the first two days were a walk in the park.  While according to the route’s elevation profile, a significant portion of the first 300k consisted of a gradual descent to Lake Huron, followed by a (mostly) flat ride to Owen Sound, the reality was that while there no significant climbs, the rolling terrain, open fields, slight headwind, heat/humidity, various rugged unmaintained sections, and long days in the saddle combined to make this initial portion of the route a real slog.  So much so that for many riders (including myself), the planned 150k ride to some wild camping spots south of Georgian Bay on the second day was aborted, in favour of a well-earned beer (or three) and the relative comforts of an $80 motel bed in the town of Thornbury.

Meanwhile, the planned route for Day Three included the start of the Blue Mountains portion of the trip.  While the term “Mountains” is most certainly a stretch, the amount of climbing – approximately 2,000 meters over the course of a single 140k day – was enough to give me pause.  I’m not afraid to admit that serious consideration was given to sleeping in and taking the most direct way to the next campsite, which was less than 15k away along a rail trail, thereby avoiding that day’s climbing altogether.

Alas, the route prevailed, as it always does.  And so began a series of punishing ups and downs, followed by the inevitable cursing directed towards my lack of climbing gears, my failing legs, various deities, the route organizers (with sincerest apologies Matt Kadey and Tabi Ferguson, the wonderful organizers of the BT 700), and especially the hordes of deer flies, who extracted their pound of flesh during each arduous climb.  Meanwhile, the amazingly fun and fast descents afforded by these hard-earned climbs were tempered by the knowledge that I would soon have to earn back every meter of lost altitude.

The day ended with a brake cooking descent off-route down the Niagara Escarpment to Craigleith Provincial Park. Expecting quiet site nestled beside the shores of Georgian Bay, I was instead greeted by a park nestled beside a busy provincial highway.  Using my cell phone’s white noise app in a vain attempt to replicate the outdoor sounds I was missing, I spent a restless night comforted by the roar of heavy truck traffic.

The next morning included more of the same – except with the added bonus of an additional 260 meter climb back up the Escarpment over the course of three kilometers, just to get back to the main route.  I was also treated to a humid fog that blanketed the route for much of the morning, adding a sauna-like quality for the first half of the day’s ride, as well as several more sections of rocky unmaintained roads and singletrack (much of the latter I admittedly bypassed in favour of the approved gravel road alternatives).

Day Four was also the day I became reacquainted with the old adage “a bird in the hand”.  After satisfying my mid-afternoon hunger with a grilled cheese from the Hockley General Store, I was tempted to pick up another couple of sandwiches to go (along with a beer or two, natch), before riding the remaining 20k to the village of Palgrave and my eventual campsite for the evening.  However, I decided to forgo the additional sandwiches and beer in favour of dinner in Palgrave.  Much to my chagrin, it turned out that the only restaurant in town – a charming church-pub conversion – had been permanently shuttered for some time, leaving only a small variety store to forage for my evening repast.  Turns out that a man can survive on Pringles and Slim Jims alone…

Lesson learned, the next morning I eagerly set off the final day of the BT 700, during which I learned another valuable lesson – I’m not good at taking lessons to heart.  So yes, after cycling 20k in the morning heat, I decided to forgo stopping at one of several nearby convenience stores located in the bustling town of Caledon, and instead pushed on to the small village Inglewood, a further 10k away.  After all, Google Maps had assured me that there was a single general store in which to replenish my dwindling water supply.  No prizes if you guessed that this store also had all the appearances of having been closed for some time.  Thankfully, much of the remaining route was on mellow rail trail all the way back to St. Jacobs, where a cold beer at the Block Three Brewing Company and a hearty congratulations from Matt awaited.

This was my first bikepacking trip using the Panorama Katahdin and overall the bike acquitted itself admirably throughout.  The bike handled the rough and rowdy unmaintained sections with aplomb, with much of the credit going to the bike’s ability to clear the 700×45 WTB Riddler tires.  It also helped that the stock rims allowed me to run these tires tubeless, as I saw several riders with pinched flats over the first couple of days.  I also found the bike very fun to ride, even strapped down with all my gear, and extremely comfortable during my long days in the saddle.  In hindsight, the only thing I would have changed prior to the trip is the chainset or rear cassette, as some wider gearing certainly have been appreciated on the third and fourth days of the trip.

And a special thanks to Matt Kadey and Tabi Ferguson, the creators for the BT 700 for developing such a fantastic and challenging route!

SHOP OUR PRODUCTS

  • Sold out
    panorama cycles t shirt
    panorama cycles t shirt

    T-shirt Bikepacking

    A fully equipped fatbike ready to take off. Bikepacking pure and simple.
    30$ (CAD)
  • fourche taiga panorama
    fourche taiga panorama

    Taïga Fork

    Transform your hardtail mountain bike into a lightweight and versatile bikepacking bike with the Taïga carbon fork.
    • Axle to crown length of 500mm. Corresponds to a suspension fork for a 29in wheel with 120mm of travel, at 25% 'sag'.
    • Boost 110x15mm spacing.
    • Tapered 1-1/2 x 1-1/8 300mm long carbon steer tube
    • Offset/rake: 51mm
    • Triple cargo cage mounts
    • Clearance for tire: 29x3.0 or 27.5x3.25
    • Post mount 160mm brake standard.
    • Wheel axle included
    • Weight: 675g
    565$ (CAD)
  • Sale
    panorama cycles touring wheelset
    panorama cycles touring wheelset

    Touring 36 spokes wheelset

    36 spoke wheelset reinforced with eyelets at each hole. Double wall rims provide the best strength for a heavily loaded bike.
    • 700c DB-30 rims, 25mm internal, 36 spokes, double wall, reinforced eyelets
    • Front hub: Novatec D791SB sealed bearings, 12mmx100mm
    • Rear hub: Novatec D792SB sealed bearings, 12mmx142mm, HG cassette body
    299$ (CAD)
  • panorama chic-chocs 2023
    panorama chic-chocs

    Chic-Chocs 27.5

    *** DEMO AND FACTORY BLEMISH AVAILABLE. WE HAVE IN STOCK A FEW FRAMES WHICH RECEIVED MINOR PAINT TOUCH UP. AVAILABLE AT SPECIAL PRICE, CONTACT US FOR INFO *** The Chic-Chocs has proven its abilities over the past few years in endurance races and winter expeditions. Whether it's for the Raid du Fjord, the Wendigo Ultra, or riding with confidence on groomed trails, the Chic-Chocs delivers. A stable geometry with a long wheelbase increases traction and flotation on soft surfaces. In addition, the Chic-Chocs is designed with a 205mm q-factor, the narrowest available for use with tires up to 5" wide. Not to be overlooked for an ergonomic position. Two Shimano drivetrains available with RaceFace cranksets and cockpit. Quality SunRingle rims and hubs (ready for -30degC!), and studdable tires that can be easily converted tubeless complete the package. Throw on some 29x3" wheels when the snow melts, and you've got a 4-season bike ready for backcountry bikepacking trips!
    3,899$4,399$ (CAD)
  • panorama cycles hat
    panorama cycles hat

    Traveler Hat

    Slip this cap into your bike bags, and keep it stylish around the campfire!
    • 6-panel cap, without structure (ideal to pack into bags).
    • Blue color: fabric made entirely from 100% recycled plastic bottles. Each cap uses about 3 bottles, which have been recovered from our environment.
    • Olive color: 100% ripstop cotton
    • Adjustable strap and plastic buckle (convenient to be attached to a bag)
    • One size fits all
    34.99$ (CAD)
  • panorama taiga
    panorama taiga

    Taïga

    *** Now is the time to book your Taïga 2023. Use promo code taiga at checkout to make a 50% reservation deposit. Limited quantity for 2023. Expected delivery: May 2023. Contact us for any questions.*** In between a trail bike and a multi-day adventure bike, the Taïga has multi purposes. Take it on your local mountain bike trails, or for a bikepacking outing in the more rugged backcountry trails. Our selection of Reynolds 725 tubing gives this frame just the right amount of suppleness and responsiveness, while keeping the weight reasonable. A 67deg steering angle and 75deg seat angle strike a balance between modern and progressive geometry, without falling into an overly radical design. For 2023, we lowered the bottom bracket slightly to increase stability. Offered with a carbon fork, a suspension fork option is available upon request. Custom built Hunt Trail Wide wheels for Panorama Cycles with 32 spokes, Teravail Ehline 29 "x2.5" tires and Shimano SLX drivetrain complete the package. * Complete bike ($3599 CAD) * The frameset comes with wheel axles, headset installed, seatpost collar and frame protectors. (1649$ CAD) * The frame only option comes with the rear wheel axle and seatpost collar. (1199$ CAD) * The Rohloff option comes with the Speedhub 500/14 A12 DB PM black, the 180mm rear disc, the shifter and everything needed to install the hub on the frame. (+1899$ CAD)
    1,199$3,599$ (CAD)
  • patte de derailleur torngat
    derailleur hanger panorama cycles

    Derailleur hanger

    Always a good idea to have a spare derailleur hanger when venturing a little further than usual...
    25$40$ (CAD)
  • Sold out
    panorama anticosti 2021
    Panorama Anticosti 2021

    Anticosti

    *** If your size is currently 'out of stock' on our website, please contact your closest PANORAMA CYCLES  dealer to know what they have on hand. Please subscribe to our newsletter to be the first informed of when the pre-sale will be launched. *** When you venture on the less traveled roads of the backcountry, sometimes, the beautiful road becomes much more bumpy than what was predicted. The asphalt becomes gravel, and the gravel literally becomes an off-road trail. It is for this kind of adventure that the Anticosti was created. The Anticosti bike is built with a bespoke selection of Reynolds 725 steel tubing, thinned where it is needed to reduce weight. A generous clearance allows you to install 27.5x2.1 or 700x50 tires with fenders. You will find all the necessary mounts to carry the equipment for a night in the tent, or for a more ambitious multi-day trip project. Do not let your current bike limit your desire to explore. Take the path you want with the Panorama Anticosti.
    3,099$ (CAD)